|
|
Build Your Online Product Catalogs?
| Product Name: |
Food grade platinum cure silicone rubber
|
| Supply Ability: |
|
| Related proudcts |
raw material, rubber, silicone, |
| Specifications |
- Durable - High tear strength for replication - Non-shrinkage - |
| Price Term: |
FOB |
| Port of loading: |
shenzhen |
| Minimum Order |
200 |
| Unit Price: |
13.58usd/kg |
|
Food grade platinum cure silicone rubber application
Food grade platinum cure silicone rubber could be mainly used for chocolate mould, candy mould, biscuit mould, nougat mould, fudge mould, fondant mould, sugar mold, tallow mold, and so on.
Food grade platinum cure silicone rubber feature
Food grade platinum cure silicone rubber can be used in the field of construction applications. Because the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone, it has some characteristics that the condensation cure type do not have, such as adjustable curing rate, being completely environmentally friendly, and so on. Therefore, our platinum cure silicone is particularly applicable for large stones molds, artificial stone molds, plaster and other architecture elements replication. The following is some ***ailed data about the performance of this model.
Food grade platinum cure silicone rubber datasheet
Model E615
Appearance Translucent
Hardness(shore A) 15±2
Mix ratio (A:B) 1:1
Viscosity (***.s) 8000±2000
Tensile-strength (***) 4.2
Tear-strength (kN/m) 12±2
Elongation (%) 470
Density(g/cm3) 1.05
Shrinkage rate(%) 0.1
Pot life (mins) 20-40
Curing time (hrs) 3-5hrs(25) / 20-30mins(60)
Food grade platinum cure silicone rubber operation way
1. Please clean your original model(mother model) before you begin your mold making operation.
2. Weigh suitable amount of E615 silicone.
3. Mixing the two parts by the ratio of 1:1/10:1 and mix part A and part B evenly in 2-3 minutes.
4. And get the mixture for vacuum-pumping for de-air the bubble in about 2-3 minutes.
5. Fix the mother model onto a clean wooden board.
5. Build a mold frame with four plastic plates or wooden plates, sealing the gap.
6. Release agent should be applied onto the products surface.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame.
8. When the silicone mixture gets cured, a clear silicone mold will come out!
Food grade platinum |
| Company: |
ShenZhen Hong Ye Jie Technology Co., Ltd.
|
| Contact: |
Ms. Lily Li |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China |
| Postcode: |
518117 |
| Tel: |
075589212369 |
| Fax: |
86-755-89948030 |
| E-mail: |
|
|
|
|
Home
